Solution for an issue with exhaust system

Dodane: 08-08-2016 12:42
Solution for an issue with exhaust system premium oil for Mclaren

This increases fuel consumption

Motor oil is a lubricant used in internal combustion engines, which power cars, motorcycles, lawnmowers, engine-generators, and many other machines. In engines, there are parts which move against each other, and the friction wastes otherwise useful power by converting the kinetic energy to heat. It also wears away those parts, which could lead to lower efficiency and degradation of the engine. This increases fuel consumption, decreases power output, and can lead to engine failure.

Lubricating oil creates a separating film between surfaces of adjacent moving parts to minimize direct contact between them, decreasing heat caused by friction and reducing wear, thus protecting the engine. In use, motor oil transfers heat through convection as it flows through the engine by means of air flow over the surface of the oil pan, an oil cooler and through the buildup of oil gases evacuated by the Positive Crankcase Ventilation (PCV) system.

In petrol (gasoline) engines, the top piston ring can expose the motor oil to temperatures of 160 °C (320 °F). In diesel engines the top ring can expose the oil to temperatures over 315 °C (600 °F). Motor oils with higher viscosity indices thin less at these higher temperatures.

Coating metal parts with oil also keeps them from being exposed to oxygen, inhibiting oxidation at elevated operating temperatures preventing rust or corrosion. Corrosion inhibitors may also be added to the motor oil. Many motor oils also have detergents and dispersants added to help keep the engine clean and minimize oil sludge build-up. The oil is able to trap soot from combustion in itself, rather than leaving it deposited on the internal surfaces. It is a combination of this, and some singeing that turns used oil black after some running.

Rubbing of metal engine parts inevitably produces some microscopic metallic particles from the wearing of the surfaces. Such particles could circulate in the oil and grind against moving parts, causing wear. Because particles accumulate in the oil, it is typically circulated through an oil filter to remove harmful particles. An oil pump, a vane or gear pump powered by the engine, pumps the oil throughout the engine, including the oil filter. Oil filters can be a full flow or bypass type.

Źródło: https://en.wikipedia.org/wiki/Motor_oil


What to Look for searching the building for a garage?

Own car repair shop is the biggest dream of many mechanics. But before we start to run their own business, conical is to find a suitable location, and - a building that will provide comfortable working conditions. Ideally, you will find in it both the canal and on the lift. In addition, we find such an object, which will include space for storage of spare parts, and of course the social room. You should also remember the special containers for screws and plates on the wall where suspend wrenches and other tools - this will facilitate the maintenance of order. A good solution is a building next to which there is a place for parking cars repaired.


The cost of spare parts for cars

Auto parts, some of us are buying a lot more than clothes. This is often caused by poor technical condition of the vehicle or improper service, but sometimes it happens also that in the beginning we buy cheap part, which breaks down after a few days. How can you avoid such situations? The best is of course to buy original parts, even though they often cost a lot more. The cost of repairs due to specific parts can often be very high, but we always pay more to pay more for the first time, than to pay small amounts, but often. Having your own car we always have to reckon with this type of expenditure.